Hear from Our Customers
When your gutters work the way they should, you stop watching the weather with that low-grade anxiety. No more water spilling over the edge during a summer storm, no more staining running down your siding, and no more wondering if that wet corner in the basement is going to get worse.
For homes in Union Township — especially in neighborhoods like Battle Hill, Connecticut Farms, and Larchmont Estates — that matters more than most people realize. The mature oak and maple trees lining those streets are beautiful, but they fill gutters fast. A properly sized, correctly sloped seamless system handles that load. An old sectional gutter with sagging joints doesn’t.
Union County also gets hit with serious storm events. In July 2025, neighboring Clark Township saw over six inches of rain in a single day. That kind of rainfall intensity overwhelms gutters that are undersized, partially blocked, or pulling away from the fascia. When your system is installed right — with the correct pitch, the right downspout sizing, and proper discharge distance from your foundation — your home handles it. When it’s not, you find out the hard way.
We’re headquartered in Elizabeth — about five miles from Union Township — and hold NJ Home Improvement Contractor License #13VH10605800, which you can verify directly with the NJ Division of Consumer Affairs. That license isn’t a footnote. In New Jersey, any contractor doing home improvement work without it is operating illegally, and hiring one can void your homeowner’s insurance coverage if something goes wrong.
We’ve been doing exterior work throughout Union County for over ten years. That means familiarity with the older brick-facade Colonials in Putnam Manor, the split-levels near Galloping Hill, and the kind of fascia rot that hides behind gutters that have been failing slowly for years. Manufacturer certifications back up our installations, and free estimates mean you get a written, itemized quote before any work begins — no pressure, no vague numbers.
It starts with a free inspection. Before anything is quoted or scheduled, we take a real look at your exterior — not a quick glance from the driveway. The condition of your existing gutters, the fascia boards behind them, the roofline, and how water is currently moving off your home all factor into what we recommend. On Union’s older homes, that fascia inspection matters. Years of gutter overflow leave rot behind the system that isn’t visible until the old gutters come down. Finding it before installation — not after — is the difference between a job that holds and one that pulls away from the house in two years.
Once the scope is clear, you get a written estimate with line items. No verbal ballparks. If repair is the honest answer instead of full replacement, that’s what you’ll hear.
On installation day, we custom-fabricate the gutters on-site using seamless aluminum — cut to the exact dimensions of your roofline, not pre-cut sections pieced together. Pitch is calculated from scratch to ensure proper drainage to the downspout. Downspout placement and extension distance from the foundation are set based on your property’s actual drainage needs, not a default position. In Union, where portions of the township carry documented flood risk near the Elizabeth River corridor and Larchmont Reservation, that last detail isn’t minor.
Ready to get started?
Every gutter installation includes seamless aluminum gutters fabricated on-site, correct pitch calculation for proper water flow, downspout installation sized for your roof’s actual square footage, and discharge positioning that moves water away from your foundation — not just off the roofline. If the fascia behind your old gutters is compromised, we address that before the new system goes up. Putting new gutters on rotted wood is a short-term fix that creates a longer-term problem, and it’s something that shows up regularly on Union’s postwar housing stock.
For homeowners dealing with storm damage, we work directly with insurance companies. If wind, hail, or falling debris from one of Union’s mature street trees damaged your gutters, your homeowner’s policy may cover part or all of the replacement. Most homeowners don’t know how to document that damage effectively or navigate the adjuster process. We handle that assistance — it costs nothing extra and can make a real difference in what comes out of your pocket.
Because we also handle roofing and siding, the inspection covers the full exterior picture. If your roof is shedding more water than your gutters can manage, or your siding shows years of overflow staining, you’ll hear about it — because fixing the gutter without addressing what’s driving the problem just delays the next call.
No permit is required for gutter installation or replacement in Union Township. Under New Jersey’s Uniform Construction Code, exterior gutters and leaders — which is what downspouts are officially called in NJ code — are classified as ordinary maintenance. That means no permit application, no inspection scheduling, and no added delay between your estimate and your installation date.
What is still required, however, is that the contractor performing the work holds a valid NJ Home Improvement Contractor registration. That’s a state-level requirement that applies regardless of whether the job needs a permit. Hiring an unlicensed contractor for gutter work in Union can void your homeowner’s insurance coverage for any related damage claims and leaves you without legal recourse if the work fails. We hold NJ HIC License #13VH10605800, which is current and verifiable through the NJ Division of Consumer Affairs.
For most single-family homes in Union Township, a full seamless aluminum gutter replacement runs somewhere between $2,800 and $5,200, depending on the size of the home, the number of downspouts, and whether any fascia work is needed before installation. Seamless aluminum — the industry standard for residential installations — typically comes in at $8 to $28 per linear foot installed, with the range reflecting differences in gutter profile, downspout configuration, and site conditions.
On Union’s older Colonial and split-level homes, fascia replacement is sometimes part of the job. Decades of slow gutter failure leave rot behind the system that only becomes visible once the old gutters are removed. That work adds cost, but skipping it and installing new gutters on compromised wood is a short-term decision that leads to a faster failure. Any additional scope like that gets identified during the free inspection and included in the written estimate — so there are no surprises after the crew shows up.
The honest answer is that it depends on what’s actually failing — and that’s something worth having a professional look at before you commit to either. Sectional gutters with one or two separated joints can often be resealed or re-supported if the rest of the system is in decent shape. But if the gutters are pulling away from the fascia in multiple spots, if the pitch has shifted so water pools in the middle of a run, or if the material itself is corroding or cracking, repair is usually a temporary fix on a system that’s already past its useful life.
In Union’s older neighborhoods, where a lot of homes are still on their original or early-replacement gutter systems, the more common finding is that the gutters have been slowly failing for years — sagging brackets, separated seams, and fascia rot that’s been building up behind the system. A free inspection gives you a clear picture of what’s actually going on, and if repair is the right call, that’s what you’ll hear. There’s no incentive to recommend replacement when a targeted repair is what the home needs.
Seamless aluminum is the right choice for the overwhelming majority of homes in Union Township, and it’s what we install as our standard. Aluminum doesn’t rust, handles New Jersey’s freeze-thaw cycles better than steel, and because it’s fabricated on-site in a single continuous run, it eliminates the mid-span seams that are the most common failure point in older sectional systems. It’s also available in a range of colors if matching the exterior matters to you.
Copper gutters are an option for homeowners who want a premium aesthetic — they’re durable and develop a distinctive patina over time — but they come at a significantly higher cost and aren’t necessary for most residential applications. Vinyl gutters are inexpensive but tend to become brittle in cold weather, which is a real consideration given Union’s winters. For a home in Battle Hill or Connecticut Farms that’s going to face decades of leaf load from mature street trees and regular summer storm events, seamless aluminum is the practical, long-lasting answer.
It can be, depending on your policy and the cause of the damage. Most standard homeowner’s insurance policies cover sudden, accidental damage from wind, hail, or falling debris — including branches from the kind of large oak and maple trees that line streets throughout Union’s neighborhoods. What they typically don’t cover is damage from gradual deterioration or lack of maintenance, which is why the documentation of how and when the damage occurred matters.
The process involves filing a claim, having an adjuster assess the damage, and providing documentation that supports the storm-related cause. Where homeowners often lose coverage is in the documentation step — vague or incomplete damage records give adjusters room to attribute the failure to wear and tear rather than the storm event. We work directly with your insurance company, document the damage professionally, and help make the case for coverage that reflects the actual scope of the loss. Given the intensity of storms that have hit Union County in recent years, it’s worth finding out what your policy covers before you assume you’re paying out of pocket.
The tree canopy in neighborhoods like Battle Hill, Larchmont Estates, and Connecticut Farms is one of the things that makes those streets look the way they do — but it creates a real maintenance burden on gutters. Large oaks and maples drop leaves, seed pods, twigs, and organic debris from late summer through November, and gutters in those areas can go from clear to partially blocked in a matter of weeks during peak leaf season. Clogged gutters heading into winter are one of the leading causes of ice dam formation, which puts stress on brackets, forces water behind the gutter, and can push moisture under shingles.
The most practical long-term answer is a properly installed gutter system combined with regular seasonal cleaning — at minimum once after peak leaf fall in November and once in the spring to clear any debris that accumulated over winter. Gutter guards are sometimes recommended as a solution, but their effectiveness varies significantly by product and tree type, and they don’t eliminate cleaning entirely. If you’re dealing with heavy debris load from mature trees on your property, that’s worth discussing during the inspection so the downspout sizing and system configuration account for the actual conditions your gutters are going to face.